Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!ames!pacbell!att!mcdchg!mcdphx!teroach.UUCP!stan From: stan@teroach.UUCP (Stan Fisher) Newsgroups: comp.sys.amiga.tech Subject: Re: Reading Autoconfig Parameters From a Card [REPOST] Message-ID: <12573@mcdphx.phx.mcd.mot.com> Date: 6 Mar 90 22:31:59 GMT References: <1261@mindlink.UUCP> Sender: listen@mcdphx.phx.mcd.mot.com Reply-To: stan@teroach.UUCP (Stan Fisher) Organization: Motorola Microcomputer Division, Tempe, Az. Lines: 49 In article <1261@mindlink.UUCP> a186@mindlink.UUCP (Harvey Taylor) writes: > I have had a couple of requests for a repeat, so... > Okay here is a little program that will tell you what > AutoConfig boards you have. Run this through shar, uudecode > and zoo. I'm one person that wanted this reposted or preferably emailed to me because the original posting had errors and wouldn't unshar or uudecode or unzoo! Now the repost is the same exact file and has all the same errors. Could you maybe re-zoo/encode/shar this file and post or mail it? Don't mean to sound harsh, that's not my intent at all, I'll be very appreciative to get this program. >#!/bin/sh ># shar: Shell Archiver ># Run the following text with /bin/sh to create: ># pacd4.zuu ># This archive created: Sun Mar 4 14:58:23 1990 >echo shar: extracting pacd4.zuu >sed 's/^XX//' << HAR_EOF > pacd4.zuu ^^ missing '\S' ------------ Extra leading 'X' | V >XX >XXbegin 644 pacd4.zoo >XXM6D]/(#(N,#`@07)C:&EV92X:``#XXM_0(!F`,``'$```!D%(MUF,\!```)P,```$```````````!004-$-`"3F@``/ ^ | Line 2 and 9 are bad, missing chars on the end of the lines. | V >XXMS,NUQ79$,!8T`V&<:4P"B(3%L@(A`M;IY1(`((W;'^Q,"O.[_^?9GYN5!%G And the size unpacks wrong which is probably 'cause of the above errors? Basically I've done what I can to hand patch the fixable problems but still can't replace the missing data in the encoded part. Thanks. Stan Fisher - stan@teroach.phx.mcd.mot.com - asuvax!mcdphx!teroach!stan Motorola Microcomputer Division, Tempe, Arizona - Voice (602) 438-3228 Call our User Group BBS "M.E.C.C.A." running Atredes 1.1 @ (602) 893-0804