Xref: utzoo comp.sys.amiga:51856 comp.sys.amiga.tech:10536
Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!cos!andrews
From: andrews@cos.com (Andrew R. Scholnick)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: UUCP 1.03D (Help!)
Keywords: UUCP
Message-ID: <27992@cos.com>
Date: 13 Mar 90 19:23:33 GMT
Organization: Corporation for Open Systems, McLean, VA
Lines: 36

I WAS DOING JUST FINE! (It was running... I swear!)

My Modem went dead (an Avatex, 2400 Baud) so I borrowed a Hayes 2400 Baud
from the office and... 
	1) uucp still dials the call OK
	2) uucp (sometimes) makes the login ok
	3) uucp HANGS UP/Never acknowledges the 'Shere' message 
	   from the remote uucp being dialed... :-{
	4) the spool/LOGFILE shows the following
		UUCICO, AmigaUUCP, - STARTUP V1.03D (0.40w/0.60w)
		UUCICO, nodename, - DIALED nodename
		UUCICO, nodename, - SUCCEEDED call to nodename
		...
		(there are also lots of FAILED call messages)
	   I never get an OK or COPY or REQUEST or REQUESTED message.
	   There is plenty of stuff queued up...
My first guess was that the Hayes was not configured correctly... It looks
fine though.  I am using a cable which passes pins 2,3,4,5,6,7,8 and 20. I
used a cable which passed all 25 pins for the Avatex.

Anyone have a problem with a Hayes modem?
Anyone have a similar problem, where calls are made and logging in but
uucp is exiting rather than acknowledge the 'Shere' message from the
remote uucico?

I am stumpped.

(Oh, if it makes a difference, the Amiga has 2.5MB RAM, and a MC68020/881 in it
 and is running ADOS 1.3.)

ARS.
-- 
- Andrew R. Scholnick @ Corp. for Open Systems, McLean, VA -- andrews@cos.com
- {uunet, sundc, decuac}!cos!andrews -- Everything I write blame on me, NOT
-- my employer. - "Adventure is when you toss your life on the scales of
-- chance and wait for the pointer to stop." - M. Leinster (First Contact)