Xref: utzoo unix-pc.general:4988 comp.sys.att:8989
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!cs.utexas.edu!usc!rutgers!ucsd!ucsdhub!hp-sdd!hplabs!hpda!motcsd!mcdcup!mcdchg!ditka!zinn!eci!suntau!forrie
From: forrie@suntau.UUCP (Forrie Aldrich)
Newsgroups: unix-pc.general,comp.sys.att
Subject: PACKDISK for 3B1 ... N E E D info
Message-ID: <60@suntau.UUCP>
Date: 10 Mar 90 23:45:06 GMT
Followup-To: poster
Distribution: usa
Organization: CREATIVE CONNECTIONS (suntau) - Dover, New Hampshire, USA
Lines: 22

After several unsuccessful attempts to contact Andy Fyfe, the
author of PACKDISK, I am forced to ask the net for help.

Would someone out there who has used this utility successfully on
the 3B1 please send me more info on how to do it?  I realize that
/dev/fp002 "*must* *not* be mounted ...", but this creates problems
when you try to do this say from the floppy file system disk... do 
you copy over /etc/mknod to the floppy and go from there?  This
is very confusing... 

Any help would be greatly appreciated.... especially if this tool
really works and makes a difference...            

Thanks in advance...

Forrie

-- 
.-------------------------_   /|---------------------------------------------.
| Forrie Aldrich          \'o.O'   Email: uunet!unhd!unhtel!suntau!forrie    |
| (forrie@suntau.UUCP)    =()_()=         uunet!zinn.mv.com!eci!suntau!forrie|
.----------------------------U-----------------------------------------------.