Xref: utzoo comp.periphs:2667 comp.sys.ibm.pc:45910 comp.unix.i386:3365 comp.periphs.scsi:119
Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!asuvax!ncar!husc6!spdcc!dyer
From: dyer@spdcc.COM (Steve Dyer)
Newsgroups: comp.periphs,comp.sys.ibm.pc,comp.unix.i386,comp.periphs.scsi
Subject: Re: Newbury drives and 154x host adapters
Message-ID: <1991@ursa-major.SPDCC.COM>
Date: 7 Mar 90 20:53:07 GMT
References: <7061@pitt.UUCP>
Reply-To: dyer@ursa-major.spdcc.COM (Steve Dyer)
Organization: S.P. Dyer Computer Consulting, Cambridge MA
Lines: 21

In article <7061@pitt.UUCP> km@cs.pitt.edu () writes:
>I would be interested in hearing from anyone with experience using
>Newbury drives with the 154x series host adapters. I currently am
>using a Newbury 4380S (with 3380S rom) in a MacII. There are no
>problems under MacOS, but with the A/UX driver the drive exhibits
>timeouts after SCSI bus resets. I intend on moving the drive to a
>386 machine with a 1542 host adapter, but I would like to know what
>I am getting into beforehand.

I'm using a 4380S with the Adaptec 1542A adapter on a RT PC.
It works fine.

There is a little bit of strangeness with the Newbury drives in that
they return a "UNIT ATTENTION" status after a SCSI bus reset and
a dummy MODE SENSE must be issued before it will recognize any commands.
I believe this behavior can be changed permanently by issuing the correct
sequence of MODE SELECT commands.
-- 
Steve Dyer
dyer@ursa-major.spdcc.com aka {ima,harvard,rayssd,linus,m2c}!spdcc!dyer
dyer@arktouros.mit.edu, dyer@hstbme.mit.edu