Xref: utzoo comp.sys.ibm.pc.rt:1487 comp.unix.aix:705
Path: utzoo!attcan!uunet!cs.utexas.edu!ut-emx!nghiem
From: nghiem@ut-emx.UUCP (Alex Nghiem)
Newsgroups: comp.sys.ibm.pc.rt,comp.unix.aix
Subject: Re: Benchmarks for IBM Risc/6000
Message-ID: <25849@ut-emx.UUCP>
Date: 10 Mar 90 19:02:51 GMT
References: <25695@ut-emx.UUCP> <25834@ut-emx.UUCP>
Reply-To: nghiem@emx.UUCP (Alex Nghiem)
Organization: UTexas Computation Center, Austin, Texas
Lines: 24

In article <25834@ut-emx.UUCP> nghiem@emx.UUCP (Alex Nghiem) writes:

>I have received the drystone 2.1 demo and the xfroot demo. Did not
>have a chance to try the x benchmark yet. I tried the drystone
>on an RT 6150 AIX 2.1.2 (~2100 drystones), a Sun 3 [150?] 4.0.3
>(~2800 drystones), a Vax [11/750?] BSD 4.3 (~1600 drystones), 
>and Macintosh II A/UX 1.01 (~2900 drystones). The RISC/6000 is
>advertised to run ~45K drystones.

Our RT is a 6150 Model 25 with the original processor board running under
AIX 2.1.2 . In all tests, the standard c compiler was used.

Late last night, I downloaded some Unix Benchmarks from directory
PD2:<UNIX-C.BENCHMARKS> @SIMTEL20.ARPA . However, the
makefile bombed under BSD4.3 on the VAX.
__________________________________________________________________________
This article is posted for factual information only. Any misrepresentation,
if any, is purely unintentional. Any opinion expressed or implicit in
these remarks are solely my own.

nghiem@emx.utexas.edu
!cs.utexas.edu!ut-emx!nghiem
nghiem@walt.cc.utexas.edu
!cs.utexas.edu!ut-emx!walt!nghiem