Path: utzoo!attcan!uunet!bywater!scifi!njs
From: njs@scifi.UUCP (Nicholas J. Simicich)
Newsgroups: comp.sys.ibm.pc.rt
Subject: Re: installing VRM for AIX 2.2.1
Keywords: VRM, AIX
Message-ID: <1237@scifi.UUCP>
Date: 13 Mar 90 02:09:19 GMT
References: <3259@umn-d-ub.D.UMN.EDU>
Reply-To: njs@scifi.UUCP (Nicholas J. Simicich)
Organization: Nick Simicich, Peekskill, NY
Lines: 44

In article <3259@umn-d-ub.D.UMN.EDU> psiders@umn-d-ub.D.UMN.EDU (Paul Siders) writes:
 >I am trying to install AIX 2.2.1 on an RT that is currently running AIX 2.2 .
 >I intend to change the sizes of the minidisks as I install.
 >
 >I shutdown and powerdown the system, insert the first VRM diskette, then
 >turn on the power.  The light on the floppy drive comes on briefly, goes
 >out, then comes on once more, briefly.  THEN the system comes up in multi-
 >user mode under AIX 2.2 .  This behavior is repeatable.  I've tried it
 >at least 10 times.
 >
 >I tried running diagnostics, but that fails in just the same way.  The
 >diskette drive light blinks on twice, but the system comes up under 2.2 .
 >
 >I believe the VRM diskette is OK, because my IBM SE let me try it on his
 >machine, where it worked fine (That is, the powerdown-poweron brought up
 >the VRM installation menu.)  When the system is up, I can mount /diskette0. 
 >I'm able to ls and cp from the VRM diskettes.

Power off the system, open the covers, and disconnect the battery.
Let it stay disconnected for about 15 minutes with the power off.
Reconnect the battery and power up the machine.  It should boot from
the floppy.  Replacing the motherboard works, too. :-)

While you're in the system, make sure that the floppy drive is
connected to the controller, and that all of the connections are good.
Wiggle them a bit.

>QUESTIONS:
>(1) Why is this happening and what can I do about it?  

The RT thinks you've told it not to boot from the floppy with a
keyboard sequence.  (Or, the floppy is broken.  If the battery trick
doesn't work, call your CE.)

>(2) Can I install VRM without using the installation menu?  Could I, for
>    example, simply copy all the files from the VRM diskettes onto the
>    hard disk /vrm minidisk?

Hopefully, it won't be necessary.

Hope I'm right about this one after being wrong about xxx.se.ibm.com
being nameserved.
-- 
Nick Simicich --- uunet!bywater!scifi!njs --- njs@ibm.com (Internet)