Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!dogie.macc.wisc.edu!decwrl!shelby!rutgers!mcdchg!michael
From: michael@mcdchg.chg.mcd.mot.com (Michael Bodine)
Newsgroups: comp.sys.m68k
Subject: Re: MVME215-2 switch settings?
Message-ID: <32750@mcdchg.chg.mcd.mot.com>
Date: 8 Mar 90 18:31:56 GMT
References: <1326@otc.otca.oz>
Reply-To: michael@mcdchg.chi.il.us (Michael Bodine)
Organization: Motorola Microcomputer, Schaumburg, IL
Lines: 20

Greg Wilkins (gregw@otc.otca.oz) writes:
>  I  have bought a MVME 215-2 RAM card second hand.
>  Does anybody know what the jumper settings are to set the base memory
>  address?
A board reference manual is available from your local Motorola MCD sales
office.  To fill the breach while you wait:
Header K2 pins	Header K3 pins
1-2	n/a	1-2	A24	
3-4	n/a	3-4	A25	
5-6	A18	5-6	A26	
7-8	A19	7-8	A27	
9-10	A20	9-10	A28	
11-12	A21	11-12	A29	
13-14	A22	13-14	A30	
15-16	A23	15-16	A31	
Jumper installed => 0
Jumper removed   => 1
-- 
[ Michael Bodine, michael@chg.mcd.mot.com, Dial: (708) 576-7840, FAX: x8875   ]
[ Motorola MCD; 1100 Woodfield; Suite 334;  Schaumburg, Il  60173             ]