Xref: utzoo comp.sys.mac:50365 comp.sys.mac.hardware:2176
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!brutus.cs.uiuc.edu!apple!sun-barr!newstop!sun!imagen!atari!portal!portal!cup.portal.com!Justin_Randall_Padawer
From: Justin_Randall_Padawer@cup.portal.com
Newsgroups: comp.sys.mac,comp.sys.mac.hardware
Subject: Re: 3.5" internal Mac II disk brackets-Help!
Message-ID: <27783@cup.portal.com>
Date: 11 Mar 90 02:29:41 GMT
References: <9003081346.AA02022@decwrl.dec.com>
Organization: The Portal System (TM)
Lines: 6

I had the same problem recently.  The way I did it:  Make a template from
cardboard delineating where the screws go in the 3.5 drive; then have your
hardware store drill holes in your drive platform to fit your drive.
I'm sure there is a more elegant way.  Nevertheless, this worked for me.
:-)
  --Randy Padawer