Path: utzoo!attcan!uunet!seismo!sundc!potomac!jtn
From: jtn@potomac.ads.com (John T. Nelson)
Newsgroups: comp.sys.mac.hardware
Subject: Re: SIMM installation report
Summary: 8 bits 9 bits parity etc
Message-ID: <8427@potomac.ads.com>
Date: 12 Mar 90 14:57:01 GMT
References: <0093365A.5C444140@uclapp.physics.ucla.edu>
Organization: Advanced Decision Systems, Arlington VA
Lines: 12



Now that we're on the subject...

I have (4) 1 megabyte 80 nsec SIMMS that came out of a Sun 4.  I
believe that these SIMMS have parity on them.  Is there any reason why
I couldn't plug these SIMMS into my Mca IIcx along with my non-parity
1 meg SIMMs?  I'm worried that, even if the SIMMS have the same number
of pins, that they will either fry my machine or there will be
incompatibilities amongst the modules.

Anyone know if this is possible?