Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request
From: auspex!guy@uunet.uu.net (Guy Harris)
Newsgroups: comp.sys.sun
Subject: Re: pinout chart for config sockets for MTI-1600
Keywords: Hardware
Message-ID: <5588@brazos.Rice.edu>
Date: 8 Mar 90 19:06:40 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 8
Approved: Sun-Spots@rice.edu
X-Refs:  Original: v9n71
X-Sun-Spots-Digest: Volume 9, Issue 74, message 5

>Background: I have a Sun 2/170 with an MTI-1600. The output module of this
>is the same as the ones we have at school on a Sun 3/160. I presume it's
>generic. According to the README in the yapt I recently installed, the MTI
>is the same thing as the ALM-II, but I have no confirmation of this.

You now have a refutation of it; the MTI is *not* the same as the ALM-2.
It's the same as the ALM; the ALM is a Systech MTI-1600, and the ALM-2 is
a Sun-designed-and-built board.  (Fix the README, Greg :-))