Path: utzoo!attcan!uunet!samsung!zaphod.mps.ohio-state.edu!uwm.edu!lll-winken!decwrl!
From: paine@rust.enet.dec.com (Willy Paine)
Newsgroups: comp.unix.i386
Subject: Re: HST setup for ix/386
Message-ID: <9003121643.AA22677@decwrl.dec.com>
Date: 12 Mar 90 16:43:46 GMT
Organization: Digital Equipment Corporation
Lines: 26

In article <511265@nstar.UUCP> you write:
>In article <9003120607.AA14445@decwrl.dec.com>, paine@fungus.enet.dec.com (Willy Paine) writes:
>> It is getting closer but I am getting garbage.  It is not baudrate
>> problem but it looks like flow control problem.  Sometime I can read
>> only one word and others are all garbage.  My HST is older than HST Dual
>> Standard so what is the difference between HST DS or 14.4 and older HST.
>
>Yes - make sure you program the modem and right the registers to NRAM
>at the SAME baud rate that you are locked the DTE between the modem
>and the computer at.  If not, you will get the problem you describe (or
>at least I did).
 
Which AT commands?   It sounds like &N?   I set up 19200 in gettydefs.
Are there any more on setting baudrate?
 
willy
 
-- 
................................................................
.   Willy Paine                      BBS/FAX +1-206-822-4615   .
.   willyp@seaeast.WA.COM            FidoNet 1:343/15          .
.   uunet!nwnexus!seaeast!willyp     fungus.enet.dec.com!paine . 
................................................................
.   It takes less time to do a thing right than to explain     .
.   why you did it wrong  - Longfellow.                        .
................................................................